01 / Operations, quality and suppliersEvery board
A carpenter builds one dining table to a customer’s own design and measurements.
Which method of production is this?
- AFlow production
- BJob production
- CBatch production
- DMass production
Show the answer
Answer: B Job production
Job production makes one-off items to order. Customers get exactly what they want and can pay a high price, but each item takes skilled time, so the cost per item is high.
Checked against gov.uk
02 / Operations, quality and suppliersEvery board
A factory fills thousands of identical bottles of water every hour on a continuous line.
Which method of production is this?
- AFlow production
- BJob production
- CBatch production
- DJust in time
Show the answer
Answer: A Flow production
Flow (mass) production makes large numbers of standard items nonstop. The machinery is expensive, but its cost is spread over so many units that each one is cheap to make.
Checked against gov.uk
03 / Operations, quality and suppliersEdexcel, OCR and Eduqas
A bakery makes 200 white loaves, cleans the mixers, then makes 200 brown loaves.
Which method of production is this?
- AFlow production
- BJob production
- CBatch production
- DJust in case
Show the answer
Answer: C Batch production
Batch production makes a group of identical items, then switches to the next group. It gives more variety than flow production, but machines stand idle while they are reset between batches.
Checked against qualifications.pearson.com
04 / Operations, quality and suppliersEvery board
Flow production suits a business best when:
- AEach customer wants their own unique design
- BThe product changes every week
- COrders are small and only come in now and then
- DDemand is high and steady for a standard product
Show the answer
Answer: D Demand is high and steady for a standard product
The right method depends on demand and the product. High, steady demand for a standard item suits flow production; one-off orders made to a customer’s needs suit job production.
Checked against filestore.aqa.org.uk
05 / Operations, quality and suppliersAQA
What is the main aim of lean production?
- ATo hold as much stock as possible
- BTo cut waste in every part of production
- CTo charge more than rival firms
- DTo make every product by hand
Show the answer
Answer: B To cut waste in every part of production
Lean production means cutting waste of every kind: spare stock, wasted time, wasted materials and unused space. Just in time stock control is one lean technique.
Checked against filestore.aqa.org.uk
06 / Operations, quality and suppliersAQA
How does lean production lower a firm’s costs?
- ALess is spent storing and wasting materials
- BStaff are paid below the minimum wage
- CCustomers are charged a higher price
- DThe firm stops checking quality
Show the answer
Answer: A Less is spent storing and wasting materials
Examiners want the link explained: with less stock and less waste, the firm spends less on storage space, damaged goods and materials thrown away, so its costs fall.
Checked against filestore.aqa.org.uk
07 / Operations, quality and suppliersEvery board
What does productivity measure?
- AThe number of staff employed
- BOutput per worker or per hour
- CProfit as a share of revenue
- DTotal sales revenue in a year
Show the answer
Answer: B Output per worker or per hour
Productivity is how much is produced for each worker or each hour worked. Higher productivity usually lowers the cost of each item, which helps a firm keep its prices competitive.
Checked against ons.gov.uk
08 / Operations, quality and suppliersEdexcel and OCR
Which is a likely benefit of using robots on a production line?
- AMore jobs for unskilled staff
- BMore consistent quality
- CEasier to make one-off designs
- DLower set-up costs
Show the answer
Answer: B More consistent quality
Automation, computers and robots usually raise productivity and make quality more consistent, because machines repeat the same task the same way. The cost is the large up-front spend and possible job losses.
Checked against ocr.org.uk
09 / Operations, quality and suppliersEdexcel and OCR
A furniture maker replaces its craft workers with one automated production line.
What might the business lose by doing this?
- AConsistency of quality
- BSpeed of output
- CFlexibility to make custom designs
- DThe ability to work long hours
Show the answer
Answer: C Flexibility to make custom designs
Technology means balancing cost, productivity, quality and flexibility. An automated line is fast and consistent, but it is set up for standard items, so changing designs for each customer becomes harder.
Checked against qualifications.pearson.com
10 / Operations, quality and suppliersEvery board
What is procurement?
- AChecking finished goods for faults
- BDelivering finished goods to the shops that sell them
- CFinding and buying the supplies a firm needs
- DAdvertising products to customers
Show the answer
Answer: C Finding and buying the supplies a firm needs
Procurement means choosing suppliers and buying the goods and services the business needs, at the right price, quality and time. Good procurement keeps costs down and production running.
Checked against filestore.aqa.org.uk
11 / Operations, quality and suppliersEvery board
What is logistics?
- AChoosing which supplier to use
- BRecruiting delivery drivers
- CSetting the selling price
- DMoving and storing goods
Show the answer
Answer: D Moving and storing goods
Logistics is getting goods to the right place at the right time: transport, storage and distribution. Poor logistics means late deliveries, empty shelves, lost sales and unhappy customers.
Checked against eduqas.co.uk
12 / Operations, quality and suppliersEvery board
What is a supply chain?
- AA firm’s chain of shops
- BEvery stage from raw materials to the customer
- CThe list of a firm’s shareholders
- DThe order of managers from the top down to each worker
Show the answer
Answer: B Every stage from raw materials to the customer
A supply chain is all the stages and businesses involved in getting a product from its raw materials to the final customer. A delay or fault at any stage can hold up everything after it.
Checked against filestore.aqa.org.uk
13 / Operations, quality and suppliersEvery board
Put these procurement steps in order.
- AChoose a supplier
- BPlace the order
- CDecide what goods are needed
- DReceive the delivery
Show the answer
The right order:
- Decide what goods are needed
- Choose a supplier
- Place the order
- Receive the delivery
Procurement starts with working out what the business needs, then choosing a supplier, ordering and finally receiving and checking the delivery. Each step affects cost and reliability.
Checked against ocr.org.uk
14 / Operations, quality and suppliersEvery board
A café is choosing a new milk supplier. The milk must arrive early every morning.
Which factor matters most to the café here?
- AThe size of the supplier’s office
- BPackaging design
- CThe supplier’s brand name
- DReliability
Show the answer
Answer: D Reliability
Firms choose suppliers on price, quality and reliability, and also delivery speed and cost, availability and trust. A cheap supplier is no bargain if late or poor goods let customers down.
Checked against qualifications.pearson.com
15 / Operations, quality and suppliersEvery board
A toy firm switches to a cheaper supplier on the other side of the world.
What risk does the firm take?
- AIt must become a plc
- BQuality and delivery may be less reliable
- CIt can no longer sell online
- DIts fixed costs will certainly rise every year
Show the answer
Answer: B Quality and delivery may be less reliable
Lower supply costs must be balanced against quality and service. A distant supplier means a longer supply chain, so deliveries take longer, problems are harder to fix, and quality can be harder to check.
Checked against filestore.aqa.org.uk
16 / Operations, quality and suppliersEvery board
How can good procurement help a business compete?
- AIt removes the need for any marketing
- BIt lowers unit costs, so prices can be lower
- CIt guarantees higher sales every year
- DIt means the firm will never run short of cash
Show the answer
Answer: B It lowers unit costs, so prices can be lower
Buying well, at the best price and value, and cutting waste in the supply chain lowers the cost of each unit. The firm can then charge less than rivals or earn more profit on each sale.
Checked against filestore.aqa.org.uk
17 / Operations, quality and suppliersAQA, Edexcel and Eduqas
What is just in time (JIT) stock control?
- AA large buffer stock is always kept
- BStock arrives just as it is needed
- CStock is bought once a year in bulk
- DGoods are made before orders arrive
Show the answer
Answer: B Stock arrives just as it is needed
With just in time, supplies arrive exactly when they are needed, so very little stock is held. This saves storage space and cuts waste from stock going out of date or being damaged.
Checked against qualifications.pearson.com
18 / Operations, quality and suppliersAQA, Edexcel and Eduqas
A sandwich shop uses just in time. One morning its bread supplier’s van breaks down.
What is the most likely result?
- AIts storage costs rise sharply
- BIt gets a bulk-buying discount
- CIt sells bread from its buffer stock
- DIt runs out of bread and loses sales
Show the answer
Answer: D It runs out of bread and loses sales
JIT holds almost no spare stock, so it depends on reliable suppliers: one late delivery can stop sales or production. Ordering little and often also means more deliveries and lost discounts for buying in bulk.
Checked against filestore.aqa.org.uk
19 / Operations, quality and suppliersAQA
What is just in case (JIC) stock control?
- AMaking each item only once it is ordered
- BChecking quality at each stage
- CHolding spare stock to meet sudden demand
- DOrdering stock only when it is needed
Show the answer
Answer: C Holding spare stock to meet sudden demand
Just in case means keeping buffer stock so the firm can meet unexpected demand or cope with a late delivery. The benefit is fewer lost sales; the cost is storage, insurance and stock that may go to waste.
Checked against filestore.aqa.org.uk
20 / Operations, quality and suppliersAQA, Edexcel and Eduqas
What is buffer stock?
- AThe largest amount of stock the store can hold
- BStock that is past its sell-by date
- CThe minimum stock kept for emergencies
- DStock ordered from a new supplier
Show the answer
Answer: C The minimum stock kept for emergencies
Buffer stock is the smallest amount a business keeps in reserve, so it does not run out if demand jumps or a delivery is late. It is a safety net, but it costs money to store.
Checked against filestore.aqa.org.uk
21 / Operations, quality and suppliersEdexcel
On a bar gate stock graph, what is the lead time?
- AThe time between two price rises
- BThe time a product spends being made
- CThe time stock takes to sell out
- DThe time between ordering and delivery
Show the answer
Answer: D The time between ordering and delivery
A bar gate graph shows stock falling as it is used, an order placed at the re-order level, stock falling further during the lead time, then a jump up when the delivery arrives. Stock should never drop below the buffer level.
Checked against qualifications.pearson.com
22 / Operations, quality and suppliersEvery board
In business, a quality product is one that:
- AIs made entirely by hand
- BUses the most costly materials
- CIs the most expensive on the market
- DMeets customers’ expectations every time
Show the answer
Answer: D Meets customers’ expectations every time
Quality means meeting what customers expect, consistently. A cheap product can be good quality if it does what buyers expect; this applies to services, such as a haircut or a delivery, as well as goods.
Checked against gov.uk
23 / Operations, quality and suppliersEdexcel, OCR and Eduqas
What is quality control?
- ASetting a higher selling price
- BTraining staff to prevent faults
- CChecking products to find faults
- DBuilding quality into every stage
Show the answer
Answer: C Checking products to find faults
Quality control means inspecting products, usually at the end of production or at set points, to find and reject faulty ones. It catches faults but does not stop them happening, so faulty items may already be wasted.
Checked against ocr.org.uk
24 / Operations, quality and suppliersEdexcel, OCR and Eduqas
What is quality assurance?
- AGiving refunds to unhappy customers
- BMaking sure quality is right at every stage
- CTesting finished goods at the end of the line
- DRecalling faulty goods from shops
Show the answer
Answer: B Making sure quality is right at every stage
Quality assurance builds quality into every stage, often with workers checking their own work, so faults are prevented rather than found at the end. Examiners often see quality control and quality assurance mixed up.
Checked against ocr.org.uk
25 / Operations, quality and suppliersEvery board
Which is a benefit to a business of high quality?
- AIts inspection costs fall to zero
- BIts variable costs always fall
- CIt can charge a higher price
- DIt no longer needs staff training
Show the answer
Answer: C It can charge a higher price
Good quality builds reputation, repeat custom and lets a firm charge more. Poor quality can lead to returns and product recalls, where a firm must ask buyers to return unsafe or faulty goods, which is costly and damages its name.
Checked against gov.uk
26 / Operations, quality and suppliersEvery board
Which is a cost of maintaining high quality?
- ARepeat custom
- BTraining staff
- CA better reputation
- DFewer product returns
Show the answer
Answer: B Training staff
Keeping quality high costs money: inspection, staff training and better materials. These costs are balanced against the benefits of extra sales, a strong image and fewer returns.
Checked against filestore.aqa.org.uk
27 / Operations, quality and suppliersEvery board
A bike shop worker explains which frame size and gears suit a customer’s height and riding.
Which part of good customer service is this?
- AProduct knowledge
- BLogistics
- CAfter-sales service
- DQuality control
Show the answer
Answer: A Product knowledge
Staff who know the product well can match it to each customer’s needs and answer questions with confidence. Engagement means making the whole experience a positive one, so customers come back.
Checked against filestore.aqa.org.uk
28 / Operations, quality and suppliersEvery board
Which is an example of after-sales service?
- AA help line for buyers with problems
- BA free sample before buying
- CA poster advertising the product
- DA discount for new customers
Show the answer
Answer: A A help line for buyers with problems
After-sales (post-sales) service is help given once the sale is made: user training, help lines, servicing, repairs and installation. It reassures buyers and encourages them to buy again and recommend the firm.
Checked against filestore.aqa.org.uk
29 / Operations, quality and suppliersEvery board
Which is a benefit of good customer service to the business?
- ACustomers get faster refunds
- BCustomers learn about products
- CCustomers return and spend more
- DCustomers pay lower prices
Show the answer
Answer: C Customers return and spend more
Good service raises satisfaction and loyalty, so customers come back, spend more and recommend the firm, which raises revenue and profit. Examiners note pupils often give benefits to the customer when the question asks about the business.
Checked against filestore.aqa.org.uk
30 / Operations, quality and suppliersEvery board
What is a likely effect of poor customer service?
- AHigher customer loyalty
- BBad word of mouth and lost sales
- CFewer complaints
- DMore customers coming back to buy again
Show the answer
Answer: B Bad word of mouth and lost sales
Unhappy customers complain, leave poor reviews and tell others. The firm gets a poor reputation and loses revenue, often to rivals.
Checked against filestore.aqa.org.uk
31 / Operations, quality and suppliersEvery board
Why should a business respond to customer feedback?
- ATo raise its fixed costs
- BTo avoid ever paying refunds
- CTo fix problems and keep customers loyal
- DTo stop customers from leaving any reviews online
Show the answer
Answer: C To fix problems and keep customers loyal
Feedback shows what customers like and what goes wrong. Acting on it fixes problems, shows customers they are listened to and helps keep them loyal.
Checked against qualifications.pearson.com
32 / Operations, quality and suppliersAQA and OCR
What is telesales?
- ASelling through a TV advert
- BSelling face to face in a shop
- CSelling through an app
- DSelling to customers by phone
Show the answer
Answer: D Selling to customers by phone
Telesales means contacting customers and selling to them by telephone. It reaches people without a shop, but many customers find unwanted calls annoying.
Checked against ocr.org.uk
33 / Operations, quality and suppliersEvery board
How has e-commerce changed customer service?
- ACustomers can buy and get help online any time
- BBusinesses no longer give refunds
- CAll sales must now be face to face
- DCustomers no longer need any help
Show the answer
Answer: A Customers can buy and get help online any time
Websites, e-commerce and social media let customers buy, track orders, read answers and contact firms at any hour. Good online service, such as quick replies and clear information, matters as much as service in a shop.
Checked against filestore.aqa.org.uk
34 / Operations, quality and suppliersEvery board
Under the Consumer Rights Act 2015, goods sold to consumers must be:
- AThe cheapest available, made in the UK and boxed
- BSold with a free extended warranty of two years
- CApproved by a government inspector before going on sale
- DSatisfactory quality, fit for purpose and as described
Show the answer
Answer: D Satisfactory quality, fit for purpose and as described
Consumer law says goods must be of satisfactory quality, fit for their purpose and match their description. If they are not, the customer has a right to a repair, replacement or refund.
Checked against legislation.gov.uk
35 / Operations, quality and suppliersEvery board
A shop sells a coat labelled “waterproof”. Rain soaks through it the first time it is worn.
Which consumer right has the shop broken?
- AGoods must be sold at a fair price
- BGoods must come with a gift receipt
- CGoods must match their description
- DGoods must be made in the UK
Show the answer
Answer: C Goods must match their description
The coat was described as waterproof but is not, so it does not match its description. The customer can claim a refund, repair or replacement, and the shop’s reputation may suffer.
Checked against legislation.gov.uk
36 / Operations, quality and suppliersEvery board
A customer asks a garden centre for a paint that can be used outside. The paint sold peels off in the first frost.
Which consumer right has been broken?
- AGoods must be fit for the purpose made known
- BGoods must carry the maker’s logo
- CGoods must be sold at the lowest price in the area
- DGoods must be returned within a week
Show the answer
Answer: A Goods must be fit for the purpose made known
If a customer tells the seller what they need the goods for and relies on the seller’s advice, the goods must be fit for that purpose. Paint sold for outdoor use must cope with outdoor weather.
Checked against legislation.gov.uk
37 / Operations, quality and suppliersEvery board
A customer bought a shirt in a shop and simply changed their mind. Must the shop give a refund?
- ANo, unless the shop’s own policy offers one
- BYes, but only in a sale
- CYes, always within 30 days
- DYes, as long as the customer has kept the receipt
Show the answer
Answer: A No, unless the shop’s own policy offers one
A shop does not have to refund someone who bought in person and changed their mind, though many choose to. Faulty goods are different: customers have the same rights whether they paid full price or bought in a sale.
Checked against gov.uk
38 / Operations, quality and suppliersEvery board
How long do online shoppers usually have to cancel an order, even when nothing is wrong?
- A24 hours after ordering it
- B6 months after buying it
- C3 days after delivery
- D14 days after receiving the item
Show the answer
Answer: D 14 days after receiving the item
For faulty goods, customers can reject them for a full refund within 30 days. For most online, phone or mail orders, customers can also cancel within 14 days of receiving the item even if it is not faulty.
Checked against legislation.gov.uk
39 / Operations, quality and suppliersEvery board
How can following consumer law help a business?
- AIt protects its reputation and builds trust
- BIt lets it charge any price it likes
- CIt removes the need for any quality checks at all
- DIt means it never has to refund anyone
Show the answer
Answer: A It protects its reputation and builds trust
Consumer law raises costs, such as refunds, replacements, testing and staff training. But firms that treat customers fairly avoid fines and court claims and win trust, repeat custom and good reviews.
Checked against ocr.org.uk
40 / Operations, quality and suppliersEvery board
A shop advertises “Half price, was £80, now £40”, but it never sold the item for £80.
What is wrong with this advert?
- AIt is a misleading price claim
- BIt breaks minimum wage law
- CIt breaks health and safety law
- DIt is a fair promotional offer
Show the answer
Answer: A It is a misleading price claim
Consumer law bans misleading claims about goods and prices, including a false “was” price. Since April 2025 the Competition and Markets Authority can fine firms directly for unfair practices like this.
Checked against gov.uk