Show Working
Open the app

GCSE Computer Science · Computer systemsOCR, AQA, Edexcel and Eduqas

Systems architecture: GCSE questions with answers

33 GCSE Computer Science questions on this topic. Pick your answer, then tap to see if you were right and why. Every one comes from the Show Working Computer Science bank and is checked against the source named under it.

Quiz yourself: 33 questions 1 exam question

01 / Quiz yourselfTry it, then tap to check

Systems architecture questions to try

Choose your answer before you open it. Then read why, so it sticks.

01 / Systems architectureEvery board

What is the main job of the CPU?

  1. ATo keep files when the power is off
  2. BTo connect the computer to a network
  3. CTo show images on the screen
  4. DTo process instructions and data
Show the answer

Answer: D To process instructions and data

The central processing unit (CPU) fetches instructions from memory, decodes them and carries them out, processing data as it goes. Everything a computer does is done by the CPU running instructions.

Checked against ocr.org.uk

02 / Systems architectureEvery board

Which part of the CPU carries out calculations and logical comparisons?

  1. AThe arithmetic logic unit (ALU)
  2. BThe clock
  3. CThe control unit (CU)
  4. DMain memory
Show the answer

Answer: A The arithmetic logic unit (ALU)

The arithmetic logic unit does the maths (adding, subtracting) and the logic (comparisons such as greater than, and AND, OR, NOT). The control unit tells it what to do, but does not do the calculation itself.

Checked against ocr.org.uk

03 / Systems architectureEvery board

What does the control unit (CU) do?

  1. AHolds the data and instructions used most often
  2. BDoes every calculation the CPU needs
  3. CKeeps files safe when the power is off
  4. DDecodes instructions and sends control signals
Show the answer

Answer: D Decodes instructions and sends control signals

The control unit decodes each instruction and directs the other parts of the CPU and memory by sending control signals. A common mistake is to say it carries out the calculations: that is the ALU.

Checked against ocr.org.uk

04 / Systems architectureEvery board

What does the CPU’s clock do?

  1. ACounts how many apps are open
  2. BRecords the date and time on each file
  3. CSends out regular pulses that keep the parts in step
  4. DStores the result of each calculation
Show the answer

Answer: C Sends out regular pulses that keep the parts in step

The clock sends out a steady stream of electrical pulses. Each pulse is a signal for the CPU’s parts to take their next step, so everything happens in time with everything else.

Checked against qualifications.pearson.com

05 / Systems architectureEvery board

What is a register?

  1. AA list of users allowed to log in
  2. BA cable that links the CPU to memory
  3. CA large store for files on a hard disk
  4. DA tiny, very fast store inside the CPU
Show the answer

Answer: D A tiny, very fast store inside the CPU

Registers are tiny memory locations inside the CPU itself. They hold the instruction, address or data the CPU is working on right now, so they are the fastest memory in the computer.

Checked against ocr.org.uk

06 / Systems architectureOCR, AQA and Eduqas

What is cache memory?

  1. ASpace on the hard disk used when RAM is full
  2. BA register that holds the next address
  3. CSlow storage that keeps the files a user saves for good
  4. DSmall, fast memory holding data the CPU uses often
Show the answer

Answer: D Small, fast memory holding data the CPU uses often

Cache is a small amount of very fast memory in or next to the CPU. It keeps copies of data and instructions that are used often, so the CPU can avoid the slower trip to RAM.

Checked against ocr.org.uk

07 / Systems architectureEvery board

Put these steps of the fetch-execute cycle in order:

  1. AThe instruction is carried out
  2. BThe instruction is copied from memory to the CPU
  3. CThe control unit decodes the instruction
  4. DThe address of the next instruction is sent to memory
Show the answer

The right order:

  1. The address of the next instruction is sent to memory
  2. The instruction is copied from memory to the CPU
  3. The control unit decodes the instruction
  4. The instruction is carried out

The CPU fetches an instruction from memory, decodes it to find out what to do, then executes it. Edexcel and Eduqas call this the fetch-decode-execute cycle; OCR calls it the fetch-execute cycle.

Checked against ocr.org.uk

08 / Systems architectureEvery board

What does the CPU do when it has finished executing an instruction?

  1. AFetches the next instruction
  2. BSwitches off until a key is pressed
  3. CRestarts the operating system
  4. DSaves the result to the hard disk
Show the answer

Answer: A Fetches the next instruction

The fetch-execute cycle repeats over and over while the computer is on. As soon as one instruction is done, the next one is fetched, billions of times a second in a modern CPU.

Checked against ocr.org.uk

09 / Systems architectureOCR and Eduqas

What does the program counter (PC) hold?

  1. AThe data just read from memory
  2. BThe address of the next instruction
  3. CThe number of programs running
  4. DThe result of the last calculation
Show the answer

Answer: B The address of the next instruction

The program counter holds the memory address of the next instruction to fetch. During each fetch it goes up by one, so it points to the instruction after. It does not count programs.

Checked against ocr.org.uk

10 / Systems architectureOCR and Eduqas

What does the memory address register (MAR) hold?

  1. AThe address in memory to read from or write to
  2. BThe total number of memory locations
  3. CThe data that has just been read from memory
  4. DThe result of the last calculation
Show the answer

Answer: A The address in memory to read from or write to

The MAR holds an address: the place in memory the CPU wants to read from or write to next. Remember the pair: the MAR holds where, the MDR holds what is there.

Checked against ocr.org.uk

11 / Systems architectureOCR and Eduqas

What does the memory data register (MDR) hold?

  1. AData or an instruction going to or from memory
  2. BThe speed of the clock
  3. CThe address of the next instruction
  4. DA list of all the memory locations that are still free
Show the answer

Answer: A Data or an instruction going to or from memory

The MDR holds the contents being moved between memory and the CPU: an instruction or data that has just been fetched, or data about to be written. Addresses go in the MAR and the PC, not the MDR.

Checked against ocr.org.uk

12 / Systems architectureOCR and Eduqas

What is the accumulator used for?

  1. AHolding results from the ALU
  2. BHolding the address of the next instruction
  3. CKeeping files when the power is off
  4. DCounting the clock pulses
Show the answer

Answer: A Holding results from the ALU

The accumulator is a register that holds the results of calculations done by the ALU, ready to be used in the next step or stored in memory.

Checked against ocr.org.uk

13 / Systems architectureOCR and Eduqas

Which of these is a register in the CPU?

  1. AProgram counter
  2. BArithmetic logic unit
  3. CClock
  4. DControl unit
Show the answer

Answer: A Program counter

The registers named for this course are the program counter, memory address register, memory data register and accumulator (Eduqas adds the current instruction register). The ALU and control unit are parts of the CPU, but they are not registers.

Checked against ocr.org.uk

14 / Systems architectureEduqas

What does the current instruction register (CIR) hold?

  1. AThe instruction being decoded and executed
  2. BA queue of instructions waiting to run
  3. CThe address of the next instruction
  4. DThe result of the last calculation
Show the answer

Answer: A The instruction being decoded and executed

After an instruction is fetched into the MDR, it is copied into the current instruction register. The control unit decodes it there while the program counter already points to the next one.

Checked against eduqas.co.uk

15 / Systems architectureOCR, Edexcel and Eduqas

In Von Neumann architecture, where are instructions and data kept?

  1. ATogether in the same main memory
  2. BInstructions in the CPU, data on a disk
  3. CInstructions in ROM, data only in cache
  4. DIn two memories with their own buses
Show the answer

Answer: A Together in the same main memory

In a Von Neumann computer the instructions and the data they work on are both stored, as binary, in the same main memory, and the CPU fetches them from there. This is the stored program concept.

Checked against qualifications.pearson.com

16 / Systems architectureEdexcel and Eduqas

Which bus carries memory addresses from the CPU to memory?

  1. ACache bus
  2. BControl bus
  3. CAddress bus
  4. DData bus
Show the answer

Answer: C Address bus

The address bus carries addresses one way, from the CPU to memory. The data bus carries data and instructions in both directions. The control bus carries command signals, such as memory read and memory write.

Checked against qualifications.pearson.com

17 / Systems architectureOCR, AQA and Eduqas

What does clock speed measure?

  1. AHow many cycles the CPU runs each second
  2. BHow many files a disk can hold
  3. CHow fast data travels across the internet to the computer
  4. DHow long a battery will last
Show the answer

Answer: A How many cycles the CPU runs each second

Clock speed is the number of cycles the CPU carries out each second, measured in hertz. A 3.5 GHz CPU does about 3.5 billion cycles a second, so a higher clock speed usually means more instructions processed per second.

Checked against ocr.org.uk

18 / Systems architectureOCR, AQA and Eduqas

What does a quad-core CPU have?

  1. AFour times as much RAM
  2. BFour caches and no ALU
  3. CFour processing units in one CPU
  4. DFour clocks at different speeds
Show the answer

Answer: C Four processing units in one CPU

Each core can fetch and execute instructions on its own, so more cores can handle more instructions at once. But software only gains if it is written to share its work between cores.

Checked against ocr.org.uk

19 / Systems architectureOCR, AQA and Eduqas

Sam says: “Doubling the number of cores always doubles the speed.”

Why is Sam wrong?

  1. ACores share one clock so cannot all run
  2. BEach core can only run one app a day
  3. CExtra cores switch off the cache
  4. DNot every task can be split between cores
Show the answer

Answer: D Not every task can be split between cores

Some tasks must be done one step after another, and some software is not written to use several cores. The cores also have to share memory and coordinate, so doubling cores rarely doubles the speed.

Checked against ocr.org.uk

20 / Systems architectureOCR, AQA and Eduqas

Why does a larger cache usually improve CPU performance?

  1. AIt adds extra cores to the CPU
  2. BThe CPU has to fetch from slower RAM less often
  3. CIt makes the clock tick faster
  4. DThe CPU no longer needs any RAM
Show the answer

Answer: B The CPU has to fetch from slower RAM less often

A bigger cache can hold more of the data and instructions the CPU needs. More often, what the CPU wants is already in fast cache, so it waits for slower RAM less.

Checked against ocr.org.uk

21 / Systems architectureEduqas

Compared with level 2 cache, level 1 cache is usually:

  1. Alarger and faster
  2. Blarger and slower
  3. Csmaller and faster
  4. Dsmaller and slower
Show the answer

Answer: C smaller and faster

Cache comes in levels. Level 1 is closest to each core, smallest and fastest. Level 2 and level 3 are larger but a little slower, and all of them are much faster than RAM.

Checked against eduqas.co.uk

22 / Systems architectureOCR, AQA and Eduqas

Which of these affects how fast a CPU processes instructions?

  1. AThe number of USB ports
  2. BThe size of the screen
  3. CThe number of cores
  4. DThe capacity of the hard disk
Show the answer

Answer: C The number of cores

The three factors in CPU performance are clock speed, cache size and number of cores. Running faster uses more power and makes more heat, which is why fast CPUs need good cooling.

Checked against ocr.org.uk

23 / Systems architectureOCR, AQA and Eduqas

How do registers compare with cache?

  1. ARegisters are slower but much larger
  2. BRegisters are used only when RAM is full
  3. CRegisters are faster but far smaller
  4. DRegisters sit on a separate chip
Show the answer

Answer: C Registers are faster but far smaller

Registers are inside the CPU and hold only the few values in use at that moment, so they are the fastest memory of all. Cache is a little slower but holds far more.

Checked against ocr.org.uk

24 / Systems architectureEvery board

What is an embedded system?

  1. AA general-purpose computer for many tasks
  2. BA network of computers in one building
  3. CA computer built into a device to do one job
  4. DAn app downloaded from the internet
Show the answer

Answer: C A computer built into a device to do one job

An embedded system is a computer inside a larger device, with one dedicated job, such as running a washing machine cycle or controlling a car’s brakes. Desktops, laptops and tablets are general purpose: they can run many different apps.

Checked against ocr.org.uk

25 / Systems architectureEvery board

Why does a microwave use an embedded system instead of a full PC?

  1. AIt has a large screen and keyboard
  2. BIt needs a fast internet connection
  3. CIt can run any app the user installs
  4. DIt is small, cheap and uses little power
Show the answer

Answer: D It is small, cheap and uses little power

Because an embedded system does one fixed job, it can be small, cheap to make in large numbers, use little power and be very reliable. It usually has no keyboard or screen of its own beyond simple buttons and displays.

Checked against ocr.org.uk

26 / Systems architectureEvery board

Where is the software for an embedded system usually kept?

  1. AOn a USB stick the user plugs in
  2. BOn a DVD put in each time it starts
  3. COn a server, downloaded at each start
  4. DIn non-volatile memory inside the device
Show the answer

Answer: D In non-volatile memory inside the device

An embedded system’s instructions (its firmware) are stored in memory that keeps its contents with the power off, such as ROM or flash memory. They are rarely changed, so the device works as soon as it is switched on.

Checked against eduqas.co.uk

27 / Systems architectureEvery board

A car’s anti-lock braking controller is an example of:

  1. Aan operating system
  2. Ban embedded system
  3. Ca general-purpose computer
  4. Dutility software
Show the answer

Answer: B an embedded system

The braking controller is a small computer built into the car with one job: stopping the wheels locking. Other examples are engine management, traffic lights, smart thermostats and fitness trackers.

Checked against qualifications.pearson.com

28 / Systems architectureEvery board

Which of these is hardware?

  1. AA keyboard
  2. BA device driver
  3. CAn operating system
  4. DA web browser
Show the answer

Answer: A A keyboard

Hardware is the physical parts you can touch, such as the CPU, memory, keyboard and screen. Software is the set of instructions (programs) the hardware runs, such as the operating system and apps.

Checked against cdn.sanity.io

29 / Systems architectureEvery board

In the fetch-execute cycle, where does the CPU fetch instructions from?

  1. AStraight from the hard disk
  2. BThe keyboard
  3. CMain memory (RAM)
  4. DThe printer
Show the answer

Answer: C Main memory (RAM)

Software is loaded from secondary storage into main memory first. The CPU then fetches each instruction from main memory, because the CPU cannot run instructions straight from a hard disk.

Checked against qualifications.pearson.com

30 / Systems architectureEvery board

What does “decode” mean in the fetch-execute cycle?

  1. AScrambling the instruction so that no one else can read it
  2. BTurning binary into hexadecimal
  3. CCopying the instruction into RAM
  4. DWorking out what the instruction asks the CPU to do
Show the answer

Answer: D Working out what the instruction asks the CPU to do

Each instruction arrives as a binary pattern. Decoding means the control unit works out which operation it is (for example add, load or compare) and what it applies to, ready to execute.

Checked against ocr.org.uk

31 / Systems architectureEduqas

What is a GPU mainly designed to do?

  1. AProcess graphics using many cores at once
  2. BKeep files when the power is off
  3. CConnect the computer to a network
  4. DTurn digital sound into analogue
Show the answer

Answer: A Process graphics using many cores at once

A graphics processing unit has many simple cores working in parallel, ideal for drawing graphics. An integrated GPU is built into the CPU and shares RAM; a dedicated GPU is a separate card with its own memory and is usually faster.

Checked against eduqas.co.uk

32 / Systems architectureEduqas

What does the motherboard do?

  1. AConnects the CPU, memory and other parts
  2. BProcesses the graphics for games
  3. CTurns sound into digital data
  4. DKeeps the operating system
Show the answer

Answer: A Connects the CPU, memory and other parts

The motherboard is the main circuit board: the CPU, memory and cards plug into it and it links them together. A sound card converts between digital sound data and the analogue signals of microphones and speakers.

Checked against eduqas.co.uk

33 / Systems architectureEvery board

Which part of the CPU directs the flow of data between the CPU and memory?

  1. AThe clock
  2. BThe hard disk
  3. CThe arithmetic logic unit
  4. DThe control unit
Show the answer

Answer: D The control unit

The control unit coordinates everything: it sends signals that move instructions and data between memory and the CPU, and tells the ALU which operation to do.

Checked against qualifications.pearson.com

02 / Exam questionsMarked by levels

Exam questions on this topic

Write your answer first, on paper. Then open it and tick off the points you made. The marks are as on that board’s paper.

8 marks / Choosing a CPU for video editingOCR

A college is buying computers for its video editing course. Computer A has a 4-core processor at 4.2 GHz with 8 MB of cache. Computer B has an 8-core processor at 3.4 GHz with 16 MB of cache. Both cost the same. The editing software can use all the cores a processor has.

Discuss which computer the college should buy. In your answer you should consider: clock speed, number of cores and cache size, and how each affects the performance of the editing software.

What a full answer includes
  • Clock speed is the number of fetch-decode-execute cycles per second, so Computer A, at 4.2 billion cycles a second, carries out instructions faster on each core.
  • A higher clock speed helps tasks that run on one core, but it also produces more heat.
  • Each core can fetch, decode and execute instructions on its own, so Computer B’s 8 cores can work on twice as many instructions at the same time as A’s 4.
  • More cores only help if the software can split its work between them, and this editing software can use them all.
  • Video editing, such as exporting a film, is work that splits well across cores, so B is likely to finish it sooner despite its lower clock speed.
  • Cache is very fast memory inside the CPU that holds frequently used instructions and data, so it is quicker to reach than RAM.
  • Computer B’s 16 MB cache means the processor waits for RAM less often, which helps with large video files.
  • A justified conclusion, for example that B is the better choice for this course.

Model answer

Clock speed is how many fetch-decode-execute cycles the CPU carries out each second. Computer A runs at 4.2 GHz, which is 4.2 billion cycles a second, against 3.4 GHz for B, so each of A’s cores processes instructions faster. This would help any task that runs on only one core, although faster clocks also produce more heat. However, Computer B has 8 cores to A’s 4. Each core can fetch, decode and execute instructions on its own, so B can work on twice as many instructions at the same time. This only helps if the software can split its work between cores, and the question says this editing software can. Tasks such as exporting a film or applying effects to every frame split well, so B should finish them much sooner, even though each core is slower. Cache is a small amount of very fast memory inside the CPU that stores instructions and data that are used often, so the CPU does not have to wait for slower RAM. Computer B has twice as much cache, so with large video files it will need to go to RAM less often. Overall, I would choose Computer B. Its extra cores and larger cache matter more for video editing than A’s higher clock speed, and both cost the same.

Where marks slip

More cores do not always mean a faster computer: it depends on whether the software can use them. Say what each feature does inside the CPU and then apply it to this software, rather than just stating “bigger is better”.

03 / In the appShow Working

All 33 questions in Show Working

This page shows 33 of them. In the app, choose your exam board and you only see what your exam asks for. Tap through questions, or open Read the answers to see the whole topic at once, covered until you tap. This topic is free to try.

More GCSE Computer Science topics

Our own questions, written for every board. Show Working is independent and not affiliated with any exam board.

Show WorkingFree on the App StoreFree in your browser, no download

Open it free