01 / CoastsEvery board with this unit
The distance of open water that the wind blows over to make a wave is called the:
- Abackwash
- Bfetch
- Cswash
- Dlongshore drift
Show the answer
Answer: B fetch
Waves get their energy from the wind. The stronger the wind, the longer it blows and the longer the fetch, the bigger the wave. Coasts facing a long fetch, like south-west England facing the Atlantic, get very powerful waves.
Checked against nps.gov
02 / CoastsEvery board with this unit
After a wave breaks, the water that rushes up the beach is the:
- Abackwash
- Bfetch
- Cswash
- Dlongshore drift
Show the answer
Answer: C swash
When a wave breaks, the swash carries water and sediment up the beach. Gravity then pulls the water back down as the backwash. Which one is stronger decides whether a beach is built up or worn away.
Checked against nps.gov
03 / CoastsEvery board with this unit
A constructive wave has:
- Aa tall, steep and plunging shape
- Bno swash at all
- Ca stronger swash than backwash
- Da stronger backwash than swash
Show the answer
Answer: C a stronger swash than backwash
Constructive waves are low and gentle with a long wavelength. Their strong swash carries sand and shingle up the beach and their weak backwash leaves much of it there, so the beach grows by deposition.
Checked against nps.gov
04 / CoastsEvery board with this unit
Why do destructive waves remove sand and shingle from a beach?
- AThey are low with a long wavelength
- BTheir backwash is stronger than their swash
- CTheir swash is stronger than their backwash
- DThey only break at low tide
Show the answer
Answer: B Their backwash is stronger than their swash
Destructive waves are tall, steep and frequent, and they are common in storms. They plunge down, so the backwash is stronger than the swash and drags material away from the beach. This leaves cliffs more exposed to erosion.
Checked against nps.gov
05 / CoastsEvery board with this unit
Freeze-thaw is a type of:
- Amass movement
- Bmechanical weathering
- Chydraulic action
- Dchemical weathering
Show the answer
Answer: B mechanical weathering
Water expands by about 9% when it freezes, so ice forces cracks open. Repeated freezing and thawing breaks rock into pieces without changing what it is made of, which is why it counts as mechanical weathering. It matters most where temperatures often cross 0 °C.
Checked against nps.gov
06 / CoastsEvery board with this unit
Slightly acidic rainwater slowly dissolving a chalk cliff is an example of:
- Amechanical weathering
- Bfreeze-thaw weathering
- Cchemical weathering
- Dabrasion
Show the answer
Answer: C chemical weathering
Rainwater picks up carbon dioxide and becomes a weak acid. It reacts with rocks made of calcium carbonate, such as limestone and chalk, and dissolves them. This is chemical weathering because the rock is changed, not just broken.
Checked against nps.gov
07 / CoastsEvery board with this unit
How is weathering different from erosion?
- AWeathering carries rock away
- BWeathering only happens under the sea
- CWeathering always needs moving water
- DWeathering breaks rock down where it is
Show the answer
Answer: D Weathering breaks rock down where it is
Weathering breaks down rock in place, by the weather, chemicals or living things. Erosion is the wearing away and removal of rock by a moving force such as waves. On a cliff, weathering weakens the top while waves erode the base.
Checked against nps.gov
08 / CoastsEvery board with this unit
The movement of rock and soil down a slope under gravity is called:
- Aattrition
- Bmass movement
- Cdeposition
- Dlongshore drift
Show the answer
Answer: B mass movement
Mass movement is any downhill movement of material under gravity. Rockfalls happen on steep cliffs of jointed rock, often after freeze-thaw or after waves undercut the base. On the Holderness coast, falls and topples happen alongside larger slumps.
Checked against bgs.ac.uk
09 / CoastsEvery board with this unit
Saturated clay slides down a cliff along a curved surface. This is a:
- Afreeze-thaw
- Brockfall
- Clongshore drift
- Drotational slip
Show the answer
Answer: D rotational slip
Rotational slip (slumping) is the main way the Holderness till cliffs fail. Waves cut away the base, and rain soaking into the cliff top makes the clay heavy and slippery, so a chunk slides down along a curved surface.
Checked against bgs.ac.uk
10 / CoastsEvery board with this unit
Waves trap air in cracks in a cliff, and the pressure breaks the rock apart. This is:
- Aattrition
- Bhydraulic action
- Csolution
- Dabrasion
Show the answer
Answer: B hydraulic action
In hydraulic action (AQA calls it hydraulic power on coasts) the sheer force of the water, and the air it squeezes into cracks, loosens and breaks off rock. It is most powerful where cliffs have many joints and faults and where storm waves hit them directly.
Checked against aqa.org.uk
11 / CoastsEvery board with this unit
Waves throw sand and pebbles at a cliff, wearing it away like sandpaper. This is:
- Aattrition
- Bhydraulic action
- Csolution
- Dabrasion
Show the answer
Answer: D abrasion
Abrasion wears away the cliff or sea bed: the rocks the waves carry do the damage. Attrition wears away the rocks being carried, as they hit each other. Examiners often see these two mixed up.
Checked against aqa.org.uk
12 / CoastsEvery board with this unit
Sea water dissolving chalk and limestone in a cliff is the erosion process called:
- Aattrition
- Bhydraulic action
- Csolution
- Dabrasion
Show the answer
Answer: C solution
Solution (sometimes called corrosion) is erosion by chemical action: slightly acidic water dissolves rocks made of calcium carbonate. It works well on chalk and limestone coasts such as parts of Dorset and Flamborough Head.
Checked against nps.gov
13 / CoastsEvery board with this unit
Why does the backwash run straight down the beach?
- AGravity pulls it down the steepest slope
- BGroynes push it back out
- CThe tide drags it sideways
- DThe wind blows it straight back
Show the answer
Answer: A Gravity pulls it down the steepest slope
The prevailing wind drives waves onto the beach at an angle, so the swash moves sediment diagonally up the beach. Gravity pulls the backwash straight down. Repeated many times, sand and shingle zigzag along the coast in the direction of the prevailing wind.
Checked against nps.gov
14 / CoastsEvery board with this unit
Pebbles bouncing along the sea bed are being moved by:
- Asaltation
- Bsuspension
- Ctraction
- Dsolution
Show the answer
Answer: A saltation
Waves and currents move sediment in four ways: traction (rolling large boulders), saltation (bouncing pebbles), suspension (carrying fine sand and silt in the water) and solution (carrying dissolved minerals). Faster water can move bigger pieces.
Checked against aqa.org.uk
15 / CoastsEvery board with this unit
Why do beaches often build up in bays?
- ABays are made of the hardest rock
- BWaves are at their strongest in bays
- CThe backwash is strongest in bays
- DWaves lose energy there and drop sediment
Show the answer
Answer: D Waves lose energy there and drop sediment
Deposition happens when waves or currents lose energy and slow down, so they can no longer carry their load. Sheltered bays, the calm water behind spits and areas with constructive waves are where beaches, spits and mudflats build up.
Checked against nps.gov
16 / CoastsEvery board with this unit
Headlands and bays form where:
- Agroynes trap sand on a beach
- Bthe coast is all one type of rock
- Cbands of hard and soft rock meet the coast
- Da river meets the sea
Show the answer
Answer: C bands of hard and soft rock meet the coast
Where bands of hard and soft rock run at right angles to the coast (a discordant coast), waves erode the soft rock faster to make bays, leaving the hard rock sticking out as headlands. On the Dorset coast, softer rocks form bays and harder rocks form cliffs and headlands.
Checked against bgs.ac.uk
17 / CoastsEvery board with this unit
Swanage Bay in Dorset has been eroded into:
- Ahard chalk
- Bsoft clays
- Cgranite
- DPortland limestone
Show the answer
Answer: B soft clays
Swanage sits on soft Wealden clays, which the sea has worn back into a bay. To the north, the chalk of Ballard Down resists erosion better and stands out as a headland. It is a classic example of a discordant coast.
Checked against bgs.ac.uk
18 / CoastsEvery board with this unit
Old Harry, off the Dorset coast near Swanage, is a:
- Asea stack
- Btombolo
- Cbar
- Dspit
Show the answer
Answer: A sea stack
Old Harry is a pillar of white chalk at the end of Ballard Down. It was once part of a headland: over a very long time the sea eroded the headland and left the stack standing on its own.
Checked against bgs.ac.uk
19 / CoastsEvery board with this unit
What does a cave in a headland usually start from?
- AA spit
- BA sand dune
- CA crack or weakness in the rock
- DA wave-cut platform
Show the answer
Answer: C A crack or weakness in the rock
Hydraulic action and abrasion attack a weakness, such as a joint or fault, and widen it into a cave. If caves on both sides meet, an arch forms. Weathering and erosion weaken the roof until it falls, leaving a stack, which is later worn down to a stump.
Checked against jncc.gov.uk
20 / CoastsEvery board with this unit
Durdle Door on the Dorset coast is a:
- Asea stack
- Bspit
- Cstump
- Dsea arch
Show the answer
Answer: D sea arch
Durdle Door is an arch cut through steeply tilted beds of hard Portland limestone. The same hard rock runs along the coast as a reef, protecting the bays on either side.
Checked against jncc.gov.uk
21 / CoastsEvery board with this unit
Lulworth Cove formed when the sea broke through hard limestone and then:
- Abuilt a spit across the gap
- Bdeposited a wave-cut platform
- Ceroded the softer rock behind it
- Dfroze the clay behind it
Show the answer
Answer: C eroded the softer rock behind it
At Lulworth the hard Portland limestone runs along the coast like a wall. Once the sea broke through it, waves quickly scooped out the weaker clays and sands behind, making an almost round cove with a narrow mouth. This is the classic concordant coast.
Checked against jncc.gov.uk
22 / CoastsEvery board with this unit
A wave-cut notch forms:
- Aon top of a spit
- Bfar out at sea
- Cat the top of the cliff
- Dat the base of the cliff
Show the answer
Answer: D at the base of the cliff
Waves attack the cliff foot by hydraulic action and abrasion, cutting a notch. The cliff above collapses and the cliff line moves inland, leaving a gently sloping rocky platform exposed at low tide. At Flamborough Head a platform cut into the chalk reaches up to 1 km offshore.
Checked against environment.data.gov.uk
23 / CoastsEvery board with this unit
Why does Flamborough Head stick out while the Holderness coast to its south erodes fast?
- AIt has more groynes than Holderness
- BIts chalk is harder than the Holderness clay
- CIts chalk is softer than the Holderness clay
- DWaves never reach Flamborough Head
Show the answer
Answer: B Its chalk is harder than the Holderness clay
The 2010 shoreline management plan says Flamborough Head’s chalk cliffs erode at only 0 to 0.4 m a year, while the glacial till cliffs of Holderness to the south lose about 1.8 m a year. The harder rock stands out as a headland.
Checked against environment.data.gov.uk
24 / CoastsEvery board with this unit
On average, about how fast do the Holderness cliffs retreat?
- A1.8 metres a year
- B180 metres a year
- C18 metres a year
- D1.8 centimetres a year
Show the answer
Answer: A 1.8 metres a year
The 2010 Humber shoreline management plan gives an average of about 1.8 m a year for the Holderness cliffs. They are soft glacial till, a mix of clay and stones left by ice sheets, so waves and slumping remove them quickly.
Checked against environment.data.gov.uk
25 / CoastsEvery board with this unit
About how far has the Holderness coast retreated in the last 1,000 years?
- AAbout 2 m
- BAbout 2 km
- CAbout 200 km
- DAbout 20 km
Show the answer
Answer: B About 2 km
The 2010 shoreline management plan says the Holderness coast has moved back around 2 km in 1,000 years, and 26 villages named in the Domesday survey of 1086 have been lost to the sea.
Checked against environment.data.gov.uk
26 / CoastsEvery board with this unit
Spurn Head, at the mouth of the Humber, is a:
- Atombolo
- Bheadland
- Cspit
- Dstack
Show the answer
Answer: C spit
Despite its name, Spurn Head is not a headland but a narrow ridge of sand and gravel reaching about 5.5 km into the Humber mouth. Longshore drift carries sediment eroded from the Holderness cliffs south to build it.
Checked against environment.data.gov.uk
27 / CoastsEvery board with this unit
What gives many spits a curved (recurved) end?
- AGroynes built along the spit
- BA change in wind and wave direction
- CA river flowing over the spit
- DFreeze-thaw on the shingle
Show the answer
Answer: B A change in wind and wave direction
Where the coast bends, longshore drift keeps carrying sediment straight on and drops it in deeper, calmer water. The ridge grows out to sea. Winds from another direction curve its end, and the sheltered water behind it fills with mud to form saltmarsh.
Checked against nps.gov
28 / CoastsEvery board with this unit
A ridge of sediment that grows right across a bay, joining two headlands, is a:
- Atombolo
- Bbar
- Cstack
- Dgroyne
Show the answer
Answer: B bar
A bar forms when a spit keeps growing until it closes off a bay, often trapping a lagoon behind it. A tombolo is a spit that has joined the mainland to an island. Examiners report that pupils often muddle spits and bars.
Checked against nps.gov
29 / CoastsEvery board with this unit
Which of these is hard engineering?
- AManaged retreat
- BDune regeneration
- CBeach nourishment
- DGroynes
Show the answer
Answer: D Groynes
Hard engineering builds structures, such as sea walls, groynes, rock armour and gabions, to stop the sea. Soft engineering works with natural processes, for example adding sand to beaches, restoring dunes or letting land flood on purpose. Soft schemes are usually cheaper and look more natural.
Checked against environment.data.gov.uk
30 / CoastsEvery board with this unit
A curved sea wall protects the coast mainly by:
- Atrapping sand moved by longshore drift
- Bletting the land flood on purpose
- Cadding sand to the beach
- Dreflecting wave energy back out to sea
Show the answer
Answer: D reflecting wave energy back out to sea
Sea walls protect towns such as Hornsea and Withernsea. They work well but cost a lot, and waves bouncing off them can scour the beach in front, so the wall itself can be undermined and the beach lowered.
Checked against environment.data.gov.uk
31 / CoastsEvery board with this unit
Groynes protect a beach by:
- Adissolving the rock of the cliff
- Breflecting waves back out to sea
- Ctrapping sand carried by longshore drift
- Dletting the sea flood the land
Show the answer
Answer: C trapping sand carried by longshore drift
Groynes are barriers built at right angles to the shore. They trap sediment on their up-drift side, giving a wider beach that soaks up wave energy. But less sand reaches the coast down-drift, so erosion there can speed up.
Checked against environment.data.gov.uk
32 / CoastsEvery board with this unit
Large boulders piled at the foot of a cliff to absorb wave energy are called:
- Amanaged retreat
- Bbeach nourishment
- Cgroynes
- Drock armour
Show the answer
Answer: D rock armour
Rock armour (rip-rap) uses huge boulders to break up waves before they hit the cliff. Gabions are cheaper wire cages filled with rocks that soak up wave energy, though the cages rust and break in time. Both are hard engineering.
Checked against environment.data.gov.uk
33 / CoastsEvery board with this unit
Beach nourishment means:
- Apiling rocks at the cliff foot
- Badding sand or shingle to a beach
- Cletting the sea flood farmland
- Dbuilding a concrete wall
Show the answer
Answer: B adding sand or shingle to a beach
A higher, wider beach absorbs wave energy before it reaches the defences behind it. On the Lincolnshire coast the Lincshore scheme has topped up beaches since 1994, adding about 350,000 m³ of material a year (2010 figure), because storms keep stripping the sand.
Checked against environment.data.gov.uk
34 / CoastsEvery board with this unit
In a shoreline management plan, “no active intervention” means:
- Adefences are moved inland
- Bexisting defences are kept up
- Cno money is spent on defences
- Dnew defences are built out to sea
Show the answer
Answer: C no money is spent on defences
Shoreline management plans give each stretch of coast one of four policies: hold the line, advance the line (build further seaward), managed realignment (let the shoreline move landward, under control) or no active intervention (no spending on defences).
Checked against environment.data.gov.uk
35 / CoastsEvery board with this unit
Managed retreat means:
- Aletting the sea flood some land on purpose
- Bbuilding a higher sea wall
- Cadding sand to a beach
- Dbuilding groynes along a beach
Show the answer
Answer: A letting the sea flood some land on purpose
Managed retreat (managed realignment) builds new defences further inland and lets the sea flood the land in front, where saltmarsh and mudflats form. These soak up wave energy, cost less to keep than old walls, and give new habitat. Farmland is lost, so some people object.
Checked against gov.uk
36 / CoastsEvery board with this unit
The Medmerry scheme in West Sussex is an example of:
- Abeach nourishment
- Ba groyne field
- Cmanaged realignment
- Da new sea wall
Show the answer
Answer: C managed realignment
Medmerry opened in November 2013 at a cost of £28 million. The Environment Agency built 7 km of new embankments inland, protecting almost 350 properties, and let the sea in to create 183 hectares of intertidal habitat, now an RSPB nature reserve.
Checked against assets.publishing.service.gov.uk
37 / CoastsEvery board with this unit
When were defences built to protect Mappleton village on the Holderness coast?
- A1891
- B1951
- C1991
- D2011
Show the answer
Answer: C 1991
Defences were built at Mappleton in 1991 with a 50-year design life, protecting the village and the B1242 coast road. The cliffs either side are undefended and keep retreating, and less sediment is passed south, so the defended village is becoming a small headland.
Checked against environment.data.gov.uk
38 / CoastsEvery board with this unit
East Riding of Yorkshire Council’s “rollback” policy helps:
- Aadd sand to the Holderness beaches
- Bbuild a sea wall along all of Holderness
- Chomes and caravan parks move inland
- Dbuild groynes at every village
Show the answer
Answer: C homes and caravan parks move inland
Building defences along all 60 km of Holderness would cost too much and starve the coast to the south of sediment. Instead, the council’s rollback policy, developed from its 2002 coastal zone plan, helps people move homes and caravan parks away from the eroding cliff edge.
Checked against environment.data.gov.uk
39 / CoastsEvery board with this unit
Why does the Holderness plan avoid defending the whole coast?
- AThe eroding cliffs feed sediment to the coast further south
- BThe cliffs there are made of hard granite
- CThe sea there has no waves
- DNobody lives anywhere on the coast
Show the answer
Answer: A The eroding cliffs feed sediment to the coast further south
Sediment eroded from the Holderness cliffs supplies Spurn Head and coasts further south, and the Humber plan calls continued erosion crucial for the down-drift frontages. Protecting every cliff would cut off that supply and put other places at risk.
Checked against environment.data.gov.uk
40 / CoastsEvery board with this unit
Which conditions help sand dunes to form?
- AA wide sandy beach and onshore winds
- BA beach backed by tall cliffs
- CA narrow shingle beach under deep water
- DOffshore winds blowing sand out to sea
Show the answer
Answer: A A wide sandy beach and onshore winds
Dunes form where a big expanse of sand is exposed at low tide and the shore rises gently. The sand dries, onshore winds blow it inland, and it piles up where plants or debris slow the wind. They cannot form where the beach is backed by cliffs.
Checked against conservationhandbooks.com