Show Working
Open the app

GCSE Geography · Skills and fieldworkAQA, Edexcel A, Edexcel B, OCR A, OCR B, Eduqas A and Eduqas B

Fieldwork: GCSE questions with answers

37 GCSE Geography questions on this topic. Pick your answer, then tap to see if you were right and why. Every one comes from the Show Working Geography bank and is checked against the source named under it.

Quiz yourself: 37 questions 6 exam questions

01 / Quiz yourselfTry it, then tap to check

Fieldwork questions to try

Choose your answer before you open it. Then read why, so it sticks.

01 / FieldworkEvery board

Put the stages of a geographical enquiry in order.

  1. AAsk a question and write a hypothesis
  2. BPlan the methods and assess the risks
  3. CCollect the data
  4. DAnalyse the results and draw a conclusion
  5. EPresent the data
  6. FEvaluate the enquiry
Show the answer

The right order:

  1. Ask a question and write a hypothesis
  2. Plan the methods and assess the risks
  3. Collect the data
  4. Present the data
  5. Analyse the results and draw a conclusion
  6. Evaluate the enquiry

An enquiry starts with a question, then plans, collects, presents and analyses data, reaches a conclusion and ends by reflecting on how good the data and methods were.

Checked against assets.publishing.service.gov.uk

02 / FieldworkEvery board

What is a hypothesis?

  1. AA statement you can test with data
  2. BA list of equipment
  3. CA question with no answer
  4. DThe final conclusion
Show the answer

Answer: A A statement you can test with data

A hypothesis is a statement you expect to be true and can test, such as “river width increases downstream”. Your results will either support it or not.

Checked against assets.publishing.service.gov.uk

03 / FieldworkEvery board

Which makes the best fieldwork enquiry question?

  1. AIs shopping good?
  2. BWhat is a town?
  3. CHow many towns are in England?
  4. DDo pedestrian counts fall away from the town centre?
Show the answer

Answer: D Do pedestrian counts fall away from the town centre?

A good enquiry question is focused, can be answered with data you can collect in the field, and links to geographical ideas, such as how a town centre attracts people.

Checked against assets.publishing.service.gov.uk

04 / FieldworkEvery board

What is primary data?

  1. AData from the census
  2. BData collected by someone else
  3. CData you collect yourself
  4. DThe most important data
Show the answer

Answer: C Data you collect yourself

Primary data are what you collect yourself in the field. Secondary data were collected by someone else, such as the census, Met Office records or Environment Agency flood maps.

Checked against ons.gov.uk

05 / FieldworkEvery board

Which of these is qualitative data?

  1. ARiver depth in centimetres
  2. BPebble lengths
  3. CAnnotated field sketches
  4. DPedestrian counts
Show the answer

Answer: C Annotated field sketches

Quantitative data are numbers, such as depths and counts. Qualitative data are descriptions, such as sketches, photos and interview comments. Good enquiries often use both.

Checked against assets.publishing.service.gov.uk

06 / FieldworkEvery board

In random sampling:

  1. Apoints are chosen at regular intervals along a line or grid
  2. Bevery point has an equal chance of being chosen
  3. Cthe area is split into groups first
  4. Dyou choose the easiest points to reach
Show the answer

Answer: B every point has an equal chance of being chosen

Random sampling gives every point the same chance of being chosen, often using random number tables, which avoids bias from picking sites yourself.

Checked against ons.gov.uk

07 / FieldworkEvery board

Measurements are taken every 10 metres along a transect. Which sampling method is this?

  1. AStratified
  2. BSystematic
  3. CRandom
  4. DOpportunistic
Show the answer

Answer: B Systematic

Systematic sampling takes readings at a fixed interval, such as every 10 m or every fifth person. It is quick and covers the area evenly, but can miss features between the points.

Checked against ons.gov.uk

08 / FieldworkEvery board

A study area is 60% housing and 40% parkland, so 60% of the sample points go in housing and 40% in parkland.

Which sampling method is this?

  1. AStratified
  2. BSystematic
  3. CRandom
  4. DOpportunistic
Show the answer

Answer: A Stratified

Stratified sampling splits the area or population into groups and samples each group in proportion to its size, so no group is left out or over-counted.

Checked against ons.gov.uk

09 / FieldworkEvery board

Why does a larger sample usually make results more reliable?

  1. AIt removes the need for a risk assessment
  2. BIt changes the hypothesis
  3. COne odd reading has less effect
  4. DEach reading becomes more precise
Show the answer

Answer: C One odd reading has less effect

With a small sample, one unusual reading can change the result a lot. More sites and repeated readings make results more representative and reliable.

Checked against publisher.ethnicity-facts-figures.service.gov.uk

10 / FieldworkEvery board

Which equipment measures river depth at points across the channel?

  1. AA rain gauge
  2. BA metre rule
  3. CAn anemometer
  4. DA clinometer
Show the answer

Answer: B A metre rule

Stretch a tape across the river at the water’s edge for width, then measure depth with a metre rule at regular points across. Together they give the cross-sectional area.

Checked against rgs.org

11 / FieldworkEvery board

A float travels 10 m downstream in 20 seconds.

What is the surface velocity?

  1. A200 m/s
  2. B2 m/s
  3. C0.5 m/s
  4. D0.05 m/s
Show the answer

Answer: C 0.5 m/s

Velocity is distance divided by time: 10 m ÷ 20 s is 0.5 m/s. A float is cheap and quick; a flowmeter gives more accurate readings at a chosen depth.

Checked against rgs.org

12 / FieldworkEvery board

Which change would most improve the accuracy of river velocity readings?

  1. AUse a flowmeter instead of a float
  2. BMeasure only on a windy day
  3. CTake one reading instead of three
  4. DRound each time to the nearest minute
Show the answer

Answer: A Use a flowmeter instead of a float

A float can be blown by the wind or caught on the bank. A flowmeter measures the water speed directly, so readings are closer to the true value.

Checked against rgs.org

13 / FieldworkEvery board

How is the long axis of a pebble usually measured?

  1. AWith a rain gauge
  2. BWith a ruler or callipers
  3. CWith a clinometer
  4. DWith an anemometer
Show the answer

Answer: B With a ruler or callipers

Pebble size is measured along the longest side with a ruler or callipers. Comparing size at sites along a river or beach tests ideas about attrition and longshore drift.

Checked against rgs.org

14 / FieldworkEvery board

Why should every river site be measured in the same way?

  1. ASo the fieldwork takes longer
  2. BSo the data become secondary
  3. CSo the results can be compared fairly
  4. DSo no risk assessment is needed
Show the answer

Answer: C So the results can be compared fairly

Using the same method, equipment and timing at every site means differences in the results come from the river, not from how they were measured.

Checked against assets.publishing.service.gov.uk

15 / FieldworkEvery board

Which equipment is used with ranging poles to measure the slope angles of a beach profile?

  1. AA rain gauge
  2. BA flowmeter
  3. CA clinometer
  4. DA quadrat
Show the answer

Answer: C A clinometer

For a beach profile, ranging poles are placed at each break of slope and a clinometer measures the angle between them, from the sea to the back of the beach.

Checked against rgs.org

16 / FieldworkEvery board

What does an anemometer measure?

  1. AAir pressure
  2. BRainfall
  3. CSlope angle
  4. DWind speed
Show the answer

Answer: D Wind speed

An anemometer measures wind speed, which is useful on coasts (wave energy) and in microclimate studies. Wind direction is shown by a wind vane.

Checked against weather.metoffice.gov.uk

17 / FieldworkEvery board

At each site a pupil scores litter from −3 (lots of litter) to +3 (no litter), and does the same for noise and building condition.

What kind of survey is this?

  1. AA land-use survey
  2. BA bipolar environmental quality survey
  3. CA pedestrian count
  4. DA questionnaire
Show the answer

Answer: B A bipolar environmental quality survey

A bipolar survey scores a place between two opposite words. It turns opinions into numbers that can be compared, but the scores are subjective, so two people may score the same street differently.

Checked against assets.publishing.service.gov.uk

18 / FieldworkEvery board

How do you make pedestrian counts at different sites fair to compare?

  1. ACount for the same length of time at each
  2. BCount at each site on a different day of the week
  3. CCount only at the busiest site
  4. DLet each person choose their own time
Show the answer

Answer: A Count for the same length of time at each

Counting for the same time, at the same time of day, with the same method at every site makes the counts fair to compare. Ideally the counts are made at the same time.

Checked against assets.publishing.service.gov.uk

19 / FieldworkEvery board

What is the main strength of open questions in a questionnaire?

  1. AThey take no time to answer
  2. BEveryone gives the same answer
  3. CThe answers are quick to count and put into a graph
  4. DPeople can explain their views in their own words
Show the answer

Answer: D People can explain their views in their own words

Open questions give rich qualitative answers but are hard to count. Closed questions give answers that are easy to tally and graph, but can miss what people really think.

Checked against assets.publishing.service.gov.uk

20 / FieldworkEvery board

Recording what each building on a street is used for is called:

  1. Aa pedestrian count
  2. Ba land-use survey
  3. Ca bipolar survey
  4. Da questionnaire
Show the answer

Answer: B a land-use survey

A land-use survey records whether each building is shops, offices, housing, empty and so on. It can show how land use changes away from a town centre.

Checked against assets.publishing.service.gov.uk

21 / FieldworkEvery board

Where could you find secondary data on flood risk for a river site in England?

  1. AA field sketch you drew
  2. BYour pedestrian counts
  3. CEnvironment Agency flood-risk maps
  4. DYour own depth readings
Show the answer

Answer: C Environment Agency flood-risk maps

The Environment Agency’s online maps show the long-term flood risk for places in England. They are useful secondary data to compare with your own river measurements.

Checked against gov.uk

22 / FieldworkEvery board

How often is the census, a key secondary source on population, held in England and Wales?

  1. AEvery year
  2. BEvery 10 years
  3. CEvery 5 years
  4. DEvery 20 years
Show the answer

Answer: B Every 10 years

The census counts everyone in England and Wales every 10 years; the latest was in 2021. Its data on age, housing and jobs are useful secondary data for urban enquiries.

Checked against ons.gov.uk

23 / FieldworkEvery board

In a risk assessment, what is a hazard?

  1. AA record of an accident
  2. BHow likely harm is
  3. CA plan to reduce harm
  4. DSomething that could cause harm
Show the answer

Answer: D Something that could cause harm

A hazard is something that could cause harm, such as fast water or traffic. The risk is how likely and how serious that harm is. You then remove the hazard or reduce the risk.

Checked against hse.gov.uk

24 / FieldworkEvery board

A river site has fast, deep water after heavy rain. What is the best way to reduce the risk?

  1. AUse a shallower site with easy access
  2. BWork alone to finish faster
  3. CMeasure at the deepest point first
  4. DGo back after more rain
Show the answer

Answer: A Use a shallower site with easy access

A risk assessment names each hazard, such as deep water, slippery rocks or traffic, and how to reduce it: safer sites, working in groups, staying on pavements and checking the weather.

Checked against hse.gov.uk

25 / FieldworkEvery board

What is a transect?

  1. AA line along which data are collected
  2. BA group of people interviewed
  3. CA random point on a map
  4. DA type of pie chart
Show the answer

Answer: A A line along which data are collected

A transect is a line across an area, such as from the sea to the back of a beach or out from a town centre, with readings taken along it, often at regular intervals.

Checked against assets.publishing.service.gov.uk

26 / FieldworkEvery board

Which is the best way to present river width and depth measurements at one site?

  1. AA scaled cross-section drawing
  2. BA pie chart
  3. CA pictogram
  4. DA wind rose
Show the answer

Answer: A A scaled cross-section drawing

A cross section drawn to scale shows the shape of the channel. Results drawn on a map at each site show the geographical pattern, such as change downstream or away from a centre.

Checked against assets.publishing.service.gov.uk

27 / FieldworkEvery board

Which of these is a way of presenting data, not of collecting it?

  1. ACounting pedestrians
  2. BMeasuring river depth
  3. CDrawing a scatter graph
  4. DGiving out questionnaires
Show the answer

Answer: C Drawing a scatter graph

Collecting is gathering the data in the field; presenting is turning it into graphs, maps and tables afterwards. Examiners say pupils mix the two up every year.

Checked against cdn.sanity.io

28 / FieldworkEvery board

What does analysing your results mean?

  1. ACollecting more data
  2. BDescribing patterns and explaining them
  3. CDrawing a field sketch
  4. DWriting a risk assessment
Show the answer

Answer: B Describing patterns and explaining them

Analysis means describing the patterns in your data, using figures, and explaining them with geographical theory. Anomalies, results that do not fit, should be pointed out and explained.

Checked against assets.publishing.service.gov.uk

29 / FieldworkEvery board

A good fieldwork conclusion should:

  1. Alist all the equipment used
  2. Brepeat the method in full
  3. Cadd extra data that were never collected in the field
  4. Danswer the question using evidence from the data
Show the answer

Answer: D answer the question using evidence from the data

A conclusion goes back to the enquiry question or hypothesis and says whether the results support it, quoting data as evidence.

Checked against assets.publishing.service.gov.uk

30 / FieldworkEvery board

What should an evaluation of your enquiry do?

  1. ARestate the hypothesis only
  2. BDescribe the journey to the site and the weather that day
  3. CExplain weaknesses and how they affect the conclusion
  4. DList the results again
Show the answer

Answer: C Explain weaknesses and how they affect the conclusion

An evaluation names weaknesses in the data and methods, says how far they limit trust in the conclusion, and suggests improvements that fix those weaknesses, such as more sites.

Checked against cdn.sanity.io

31 / FieldworkEvery board

In fieldwork, accurate data are:

  1. Aalways secondary data
  2. Bcollected very quickly
  3. Cclose to the true value
  4. Dthe same each time they are repeated
Show the answer

Answer: C close to the true value

Accuracy is how close a measurement is to the true value. Reliability is whether the method would give similar results if repeated. Good equipment helps accuracy; repeats and bigger samples help reliability.

Checked against assets.publishing.service.gov.uk

32 / FieldworkEvery board

GCSE geography pupils must do fieldwork outside the classroom and school grounds on at least how many occasions?

  1. AOne
  2. BSix
  3. CTwo
  4. DFour
Show the answer

Answer: C Two

Every board requires at least two fieldwork occasions in contrasting environments, covering physical and human geography and how they interact, with primary data of both kinds.

Checked against assets.publishing.service.gov.uk

33 / FieldworkEvery board

How is GCSE geography fieldwork assessed?

  1. ABy coursework marked by teachers
  2. BIn the written exams only
  3. CBy a spoken presentation
  4. DBy an outdoor practical test
Show the answer

Answer: B In the written exams only

Fieldwork is tested only in the written exams and is worth 15% of the GCSE. You are asked about your own enquiries and about fieldwork in unfamiliar contexts.

Checked against assets.publishing.service.gov.uk

34 / FieldworkEvery board

The exam asks about a fieldwork method using data from a place you have not visited. This is called:

  1. Aunfamiliar fieldwork
  2. Ba pilot study
  3. Csecondary fieldwork
  4. Da risk assessment
Show the answer

Answer: A unfamiliar fieldwork

As well as your own enquiries, the exam tests fieldwork in unfamiliar contexts, using example data. Apply what you know about methods, sampling, presentation and evaluation.

Checked against assets.publishing.service.gov.uk

35 / FieldworkEvery board

In the exam, what helps most when writing about your own fieldwork?

  1. ADescribing the coach journey
  2. BWriting about any river you know
  3. CKnowing your enquiry title, sites, methods and results
  4. DUsing your human enquiry to answer a question on physical geography
Show the answer

Answer: C Knowing your enquiry title, sites, methods and results

Learn each enquiry by its title, question, sites, sampling, methods, results and conclusion. Writing about the wrong enquiry, such as a human one for a physical question, caps the mark.

Checked against cdn.sanity.io

36 / FieldworkEduqas A and Eduqas B

For Eduqas exams in 2027, which methodological approach to fieldwork is set?

  1. AQualitative surveys
  2. BUse of transects
  3. CChange over time
  4. DGeographical flows
Show the answer

Answer: C Change over time

Eduqas sets a fieldwork approach and a framework for each year. For 2027 they are change over time and sphere of influence, so enquiries should be planned around them.

Checked against eduqas.co.uk

37 / FieldworkEvery board

Why should a fieldwork recording sheet be planned before you go out?

  1. ASo no risk assessment is needed
  2. BSo the results are certain to match the hypothesis you wrote
  3. CSo you need fewer sites
  4. DSo data are recorded the same way at every site
Show the answer

Answer: D So data are recorded the same way at every site

A well-designed recording sheet has spaces for each site, reading and repeat, so nothing is missed and data from every site are recorded in the same way.

Checked against assets.publishing.service.gov.uk

02 / Exam questionsMarked by levels

Exam questions on this topic

Write your answer first, on paper. Then open it and tick off the points you made. The marks are as on that board’s paper.

9 marks + 3 SPaG / Did your river enquiry answer its question?AQA

Write the full title of your fieldwork enquiry in which physical geography data were collected. The model answer uses made-up results from a typical pupil’s river enquiry, to show the detail to aim for; they are not facts about a real river. In the exam, use your own title, sites and results.

To what extent did your results help you to answer your enquiry question? In your answer, refer to your results and to how reliable your data collection was.

What a full answer includes
  • States the full enquiry title and the theory it tested (for example the Bradshaw model).
  • Describes the sampling briefly: how many sites, how far apart and why.
  • Quotes real results with units: width, depth, velocity and discharge from first to last site.
  • Says how far the results support the hypothesis, including any anomaly and its likely cause.
  • Evaluates reliability: repeated readings and means; limits such as one day, few sites, the float catching on plants.
  • Says how the limits affect how far the conclusion can be trusted.
  • Suggests an improvement that fixes a named weakness.
  • Ends with a judgement on “to what extent”.

Model answer

My enquiry was “How do the width, depth and velocity of our local river change downstream, as the Bradshaw model predicts?” We measured six sites, 500 m apart, from near the source, using systematic sampling so the whole stretch was covered evenly. My results largely answered the question. Width increased from 1.2 m at site 1 to 4.8 m at site 6, and mean depth from 0.11 m to 0.38 m. Velocity rose from 0.21 m/s to 0.46 m/s, so discharge (area × velocity) increased from about 0.03 to 0.84 cumecs. This supports the Bradshaw model. The one anomaly was site 4, where velocity fell to 0.18 m/s; a fallen tree just downstream had made a slow pool, so local conditions, not distance, explain it. However, the reliability of my data limits how far I can trust the conclusion. We timed the float three times at each site and took a mean, which reduced errors, and measured depth every 50 cm across the channel. But the float caught on plants at site 2, so that time was too slow. We visited on one day in March after rain, so discharge was higher than usual, and six sites is a small sample for a 2.5 km stretch. To improve, I would use a flowmeter rather than a float, add more sites and repeat the survey in summer. Overall, my results answered my question to a large extent: the pattern was clear at five of six sites. But because the data came from one day and few sites, my conclusion is reliable only for that stretch of river on that day.

Where marks slip

Writing about the wrong enquiry (human data when physical is asked) or giving no real results caps the mark. Use your actual title and figures, and answer both parts: the results and how reliable they are.

6 marks / How good were your human data methods?AQA

Write the full title of your fieldwork enquiry in which human geography data were collected. The model answer uses made-up results from a typical pupil’s urban enquiry, to show the detail to aim for; they are not facts about a real town. In the exam, use your own title, methods and results.

Evaluate the effectiveness of the data collection methods you used in your human geography enquiry.

What a full answer includes
  • Names the enquiry and at least two methods (for example an environmental quality survey and pedestrian counts).
  • Describes the sampling: number of sites and spacing along a transect.
  • Strength of the environmental quality survey: quick, and turns opinions into numbers that can be compared.
  • Weakness: scores are subjective; a fix such as averaging three people’s scores.
  • Pedestrian counts: easy to compare, but five minutes on one afternoon may not be representative.
  • Links each strength or weakness to how far the data could answer the question.
  • Reaches a judgement on overall effectiveness.

Model answer

My enquiry was “Does environmental quality improve with distance from the town centre?” We sampled ten sites every 200 m along a transect from the centre outwards, using two main methods. The first was an environmental quality survey. At each site we scored litter, noise, traffic and building condition from −3 to +3. This was effective because it was quick and turned opinions into numbers, so the ten sites could be compared and plotted on a graph. However, the scores are subjective: two people can score the same street differently. To reduce this, three of us scored each site and we took the mean, which made the data more reliable. The second method was a pedestrian count, counting people passing in five minutes at each site. It was easy to do and showed a clear fall in numbers away from the centre. But we counted only once, on a weekday afternoon, so the counts may not represent mornings or weekends, and five minutes is a short sample. Overall, my methods were fairly effective: together they showed a clear pattern that environmental quality improved and footfall fell with distance. But because of the subjective scores and the single short counts, the data were good enough to show the pattern rather than to prove it.

Where marks slip

Mixing up data collection with data presentation: examiners see this every year. Evaluate how you collected the data (sampling, timing, accuracy), not how you drew your graphs.

8 marks / Is the students’ river conclusion reliable?Edexcel A

A group of students investigated whether river discharge increases downstream. On one afternoon they visited four sites, 1 km apart. At each site they measured the width once, the depth once in the middle of the channel, and timed one float over 10 m. Site 1: width 2.0 m, depth 0.20 m, float time 40 s. Site 2: width 3.0 m, depth 0.25 m, float time 25 s. Site 3: width 3.5 m, depth 0.30 m, float time 50 s. Site 4: width 5.0 m, depth 0.40 m, float time 20 s. They concluded that discharge increases downstream.

Evaluate the reliability of the students’ conclusion. Use the data and your own understanding.

What a full answer includes
  • Works out velocity (10 m ÷ time): 0.25, 0.40, 0.20 and 0.50 m/s.
  • Works out discharge (width × depth × velocity): about 0.10, 0.30, 0.21 and 1.00 cumecs.
  • Overall the data support the conclusion: discharge rises about ten times from site 1 to site 4.
  • Site 3 is an anomaly: discharge falls because the float was slow, so the trend is not steady.
  • Weakness: single readings and one float run, so one error changes the result.
  • Weakness: depth measured only in the middle overestimates the channel area.
  • Weakness: only four sites on one afternoon.
  • Improvements: repeat the float three times, measure depth across the channel, add sites; then a judgement.

Model answer

The conclusion is partly reliable: the data show a clear overall rise in discharge, but the methods are too limited to trust the details. Velocity is 10 m divided by the float time, which gives 0.25 m/s at site 1, 0.40 at site 2, 0.20 at site 3 and 0.50 at site 4. Multiplying width, depth and velocity gives discharges of about 0.10, 0.30, 0.21 and 1.00 cumecs. So discharge at site 4 is about ten times that at site 1, which supports the conclusion that discharge increases downstream. However, the pattern is not steady. At site 3 discharge falls to 0.21 cumecs, because the float took 50 seconds. This may be a real slow pool, or the float may have caught on a plant or an eddy. Because the students timed the float only once, they cannot tell which, so one error changes the result. The method also makes the figures less accurate. Depth was measured only in the middle of the channel, which is usually the deepest point, so the area, and therefore the discharge, is overestimated at every site. Four sites on one afternoon is also a small sample, and conditions could change after rain. To make the conclusion more reliable, they should time the float three times and take a mean, measure depth at regular intervals across the channel, and use more sites. Overall, the conclusion is probably correct, but the evidence is only good enough to suggest it, not prove it.

Where marks slip

Giving opinions about the method without using the data. Calculate from the figures, point out the anomaly, and link each weakness to how far the conclusion can be trusted. Discharge is in cumecs, not m/s.

8 marks / How reliable were your urban conclusions?Edexcel A and Edexcel B

The model answer uses made-up results from a typical pupil’s urban enquiry, to show the detail to aim for; they are not facts about a real town. In the exam, use your own question, sites and results.

Evaluate the reliability of the conclusions you reached in your own human geography fieldwork.

What a full answer includes
  • States the enquiry question and conclusion clearly.
  • Names the primary methods (for example land-use mapping and an environmental quality survey) and the sampling.
  • Names secondary data used (for example Census 2021 and the English Indices of Deprivation 2025) and why it is trustworthy.
  • Quotes some of the results that support the conclusion.
  • Identifies weaknesses: one day, subjective scores, a small number of sites.
  • Explains how each weakness affects how far the conclusion can be trusted.
  • Distinguishes reliability (would repeating it give the same results?) from accuracy.
  • Reaches a judgement.

Model answer

My enquiry asked “How does land use and environmental quality change from the town centre outwards?” I concluded that shops and offices give way to housing, and environmental quality improves, with distance from the centre. This conclusion is fairly reliable for the pattern, but less reliable for the details. We recorded the main land use and an environmental quality score at 12 sites, six every 100 m along each of two transects. Shops and offices were the main land use at 5 of the 6 sites nearest the centre, but at none of the 6 furthest out, which clearly supports the conclusion. The mean environmental quality score rose from −1.5 near the centre to +2.0 at the edge. Secondary data supported this. Census 2021 data and the English Indices of Deprivation 2025 showed that the areas near the centre were more deprived. These are official sources that cover every household, so they are trustworthy, although the Census is already several years old. There are weaknesses. We visited on one weekday morning, so noise and traffic scores reflect that time only. Environmental quality scores are subjective, and different groups scored slightly differently. Twelve sites on two transects may miss streets that do not fit the pattern. If we repeated the survey on a Saturday, we might get different scores, so the results are not fully reliable. Overall, the conclusion about land use is reliable because the pattern was clear on both transects and matched official data, but the conclusion about environmental quality is less certain because of subjective scores and a single visit.

Where marks slip

Narrating the day or mixing up accuracy and reliability. Use “fieldwork colour” (your sites, sampling and real results) and link each weakness to how far your conclusion can be trusted.

8 marks + 3 SPaG / Did your coastal methods give a reliable answer?OCR A and OCR B

The model answer uses made-up results from a typical pupil’s coastal enquiry, to show the detail to aim for; they are not facts about a real beach. In the exam, use your own question, methods and results.

Evaluate how far the methods you used in your physical geography fieldwork allowed you to reach a reliable conclusion.

What a full answer includes
  • States the enquiry question and the conclusion.
  • Describes at least two methods (for example beach profiles and sediment size) and the sampling.
  • Quotes results that support the conclusion.
  • Strength: repeated or random sampling reduced bias.
  • Weakness: measuring errors with simple equipment such as a clinometer and ranging poles.
  • Weakness: one visit, at one state of the tide and one season.
  • Explains how each limitation affects the reliability of the conclusion.
  • Reaches a judgement on “how far”.

Model answer

My enquiry asked “Do groynes trap sediment moved by longshore drift along our beach?” I concluded that they do, because the beach was higher on the up-drift side of each groyne. My methods allowed me to reach this conclusion fairly reliably, although they had clear limits. I used two methods. First, at three groynes we measured beach profiles 5 m either side, using ranging poles and a clinometer to record the slope every 2 m from the sea wall to the water. On average the beach on the up-drift side was 0.6 m higher, at all three groynes, which strongly supports the conclusion. Second, we measured the long axis of 10 pebbles at each site, chosen at random by dropping a metre rule and picking the stone under the mark. This avoided choosing only large or interesting pebbles, which made the sample less biased. However, there were limitations. The clinometer was hard to read when the poles were not upright, so slopes could be a few degrees out. We visited only once, at low tide in autumn, so we do not know whether the pattern changes after winter storms. Ten pebbles per site is also a small sample. Because the difference in beach height was large and appeared at every groyne, these errors are unlikely to change the conclusion. But because we visited once, I can say only that the groynes were trapping sediment at that time, not throughout the year. Overall, my methods allowed a reliable conclusion about the pattern, but more visits and larger samples would be needed to be confident it lasts.

Where marks slip

Writing about only one method when “methods” is asked caps the answer, and so does using human fieldwork for a physical question. Link every weakness to how far it affects your conclusion.

8 marks / Change over time and sphere of influenceEduqas A and Eduqas B

For 2027, Eduqas fieldwork uses the approach “change over time” and the concept “sphere of influence”. The model answer uses made-up results from a typical pupil’s town-centre enquiry, to show the detail to aim for; they are not facts about a real town. In the exam, use your own question, methods and results.

Evaluate how well your fieldwork methods allowed you to investigate change over time in the sphere of influence of a place.

What a full answer includes
  • States the enquiry question.
  • Primary method for sphere of influence: a questionnaire asking shoppers which town or postcode area they travelled from, mapped as desire lines.
  • Method for change over time: comparing with secondary data, such as an older shop survey, old maps, Census 2011 and 2021 data, or repeat photographs.
  • Strength: desire lines show the size and shape of the sphere of influence clearly.
  • Weakness: a small or biased sample (one day, one entrance, people willing to stop).
  • Weakness: older data may have been collected differently, so comparisons are less reliable.
  • Reaches a judgement on how well the methods worked.

Model answer

My enquiry asked “How has the sphere of influence of our town centre changed over the last ten years?” My methods showed the present sphere of influence well, but showed change over time less reliably. To find the sphere of influence, we asked 40 shoppers which town or postcode area they had travelled from and how far. We mapped the answers as desire lines from each home area to the town centre. This worked well: most lines came from within about 10 km, with a few longer lines from people visiting for specialist shops, so we could see the size and shape of the area the town serves. However, we surveyed on one Saturday morning at one end of the high street, and only people willing to stop took part, so the sample may be biased. To investigate change over time, we compared our land-use survey with an older shop survey and old maps from the local library, and used Census 2011 and 2021 data on population. We also re-took photographs from the same spots as old postcards. These showed fewer clothes shops and more cafés and empty units. But the older data were collected by different people in different ways, and we had no record of where shoppers came from ten years ago, so we could not directly measure how the sphere of influence had changed. Overall, my methods were effective for measuring the sphere of influence today, but only partly effective for showing change over time, because the older data did not match our new data.

Where marks slip

Mixing up qualitative and quantitative data, or praising secondary data in general terms. Say what each source showed in your enquiry and exactly why it could or could not show change over time.

03 / In the appShow Working

All 37 questions in Show Working

This page shows 37 of them. In the app, choose your exam board and units and you only see what your exam asks for. Tap through questions, or open Read the answers to see the whole topic at once, covered until you tap.

More GCSE Geography topics

Our own questions, written for every board. Show Working is independent and not affiliated with any exam board.

Show WorkingFree on the App StoreFree in your browser, no download

Open it free